Flex Connectors

The FIREMAN™ Flexible Connector

Features of the Fireman

• 316L stainless steel
• Heavy wall yet flexible
• Wide variety of fittings available
• Crush resistant
• Kink resistant
• Collapse proof
• Full vacuum service
• UL listed for both above and below ground use
• One specification for both above and below ground
• Built in integral 346 swivel
• Minimum bend center line radius 6" thru 2", 9" for 3", and 13" for 4"
• All metal construction
• Facilitates compliance for NFPA 30 & 30A
• More corrugations
• Hex wrench flats standard
• Seamless sch. 80 carbon steel nipple available on request
• 100% pressure tested
• Braid limited
• One less thing to worry about
• Adapter swivel available on request

Additional fitting, adapter and finished assembly configurations are available.  The FIREMAN flexible connector is U.L. listed for use as a flexible connector for both above and below ground flammable liquid storage tanks and should be used with secondary containment in all applications.

• Do Not Torque Flex Connector.
• Install In One Plane of Motion.
• Do Not Exceed Minimum Bend Radius.
• Do Not Compress or Deform the Convolutions.

FLEX-ING always recommends that flex connectors be

used in a liquid tight sump and with a working leak detection system.  Installation Instruction Tags are an integral part of the flex-connector.  If you receive a flex-connector without an installation tag contact us immediately at 1-800-333-3599.  Removal of the tag voids the warranty and the UL Listing.