Flex Connectors

FIREFLEX SUMP

Features:

• Isolates FIREFLEX Flex-Connector
• UL Listed
• Meets SB 2481 (California)
• Meets State Water Resources Control Board
• Passes Tracer Testing and Helium Pretest
• Approved by Praxair
• SB989 Compliant (California)
• Rated to Full Vacuum 28 inches of Mercury
• Operates at 50 psi
• Connects to 3" FRP Secondary Containment piping using FRP clam shells
• Connects up to the sheer valve to grade level
• "Product tight"
• May be used with single wall sumps
• Can be covered with Yellow Jacket or powder coated.

 

Using a 1-1/2" FIREFLEX with a FRP 90 the Flex-Connector may be glued directly to primary piping.

Optionally a 90 fiberglass adapter may be used with male threaded FIREFLEX Flex-Connector.

FIREFLEX SUMP* may be ported with a 1/4" female port for testing or monitoring.

Inner FIREFLEX Flex-Connector is installed to sheer valve. FIREFLEX SUMP* is positioned over FIREFLEX Flex-Connector.

FIREFLEX SUMP* must be used with FIREFLEX Flex-Connector and ordered as a kit.

After the FIREFLEX Flex-Connector is installed to sheer valve and primary piping outer containment clamshells are glued. Follow and use either Smith Fibercast or Ameron piping and glue instructions.

*Patent Pending.