Flex Connectors

FIREFLEX™

AVAILABLE WITH THE 346 SWIVEL OR EZ-FIT TECHNOLOGY

Features of the FIREFLEX FLEX CONNECTOR

• SB 989 Compliant- Successful Praxair/Tracer Testing.
• All metal construction means one flex connector for both Above and Below Ground Applications.
• UL Listed for above and below ground installation.
• An 18-8 alloy with titanium, 321 Stainless Steel inner core provides long service life.
• Standard wall thickness with close pitch corrugations gives more flexibility.
• Full vacuum service.
• Actual 375 psig working pressure assembly, exceeds UL 50 psig requirement.
• The 346 Integral Male Swivel* insures ease of installation with a multi-seal design.
• NFPA 30 & 30A compliant for fire resistance.
• Thick schedule 80 end fittings protect against deformation of the ends.
• 100% pressure tested to assure quality.
• Tee's, sweep elbows and other end fittings are available.
• Minimum bend radius from the centerline is 6" thru 2", 9" for 3", and 13" for 4".
• Crush and kink resistant, collapse proof and rated for full vacuum service.
• Braid limited.
• Custom lengths and configurations available call for details.

Please contact us for details.

* Patent pending

The 346 Integral Male Swivel is made to make installation easier. The 346 IMS is constructed of ASTM High Grade Carbon Steel. Sealing protection is provided by 3 Viton Quad Rings at six sealing points.

• Do Not Torque Flex Connector.
• Install In One Plane of Motion.
• Do Not Exceed Minimum Bend Radius.
• Do Not Compress or Deform the Convolutions.

FLEX-ING always recommends that flex connectors be used in a liquid tight sump and with a working leak detection system.  Installation Instruction Tags are an integral part of the flex-connector.  If you receive a flex-connector without an installation tag contact us immediately at 1-800-333-3599.  Removal of the tag voids the warranty and the UL Listing.